Architecture studio Generate has unveiled plans to build a carbon-neutral apartment block, named Model-C, in Boston using a cross-laminated timber “kit of parts”.
The proposed five-storey block will use Generate‘s Model-C prototype “kit of parts” system, which is a type of modular prefabrication that allows for disassembly and reuse.
It is intended to achieve the Passivhaus standard for energy efficiency and will aim to operate at a net-zero-carbon level, which will make it an important example of a more sustainable building, according to Generate.
“To our knowledge, it will be one of the most sustainable buildings in America,” CEO John Klein told Dezeen.
The parts will be made of cross-laminated timber (CLT) – an engineered wood consisting of laminated timber sections. The material is less energy-intensive than conventional materials like concrete and steel.
The start-up has teamed up with local developer Placetailor, which focuses on creating Passivhaus, net-zero energy, and net-zero carbon, to develop the project.
Once complete, it will be the city’s “first ground-up, full cross-laminated-timber Passivhaus”, according to Generate.
Klein, who has built large-scale mass timber structures such as The Longhouse as part of his research at the Massachusetts Institute of Technology (MIT), said it will be “one of the most sustainable buildings in the US”.
“By replacing conventional concrete and steel construction materials, which significantly contribute to the release of carbon dioxide into the atmosphere, Model-C projects instead act as a carbon sink by storing the carbon in the timber of the CLT cellular structure and envelope over the lifetime of the building,” said Generate.
When complete Generate hopes that the building will operate at a net-zero-carbon level. This will mainly be achieved because of the large amounts of wood used in the building will have absorbed carbon dioxide, according to Klein.
“Additionally, it is the large amount of wood fiber in the cross-laminated timber panels that act as a carbon sink – ultimately tackling both operational and embodied energy with a single system,” he said.
The building will include a CLT rooftop canopy to which solar panels can be easily mounted. The walls, meanwhile, will comprise mineral wool and cross-laminated timber to ensure the interiors are well-insulated.
“This approach enables the building to reduce its heating and cooling loads,” Klein said.
Designed for the Lower Roxbury neighbourhood, the 19,000-square-foot (836-square-metre) building will contain 14 residential apartments plus a co-working space at ground level for the local community.
The Model-C can also be tweaked to suit different sites and requirements.
For the demonstration project, they are building on an acute triangular block, which Klein said shows “the system’s adaptability to extreme angular conditions, pervasive throughout urban centres”.
The system can work with various cladding materials, but this building will have a lightweight porous metal cladding. It will be prefabricated in sections, which in turn will reduce the need for scaffolding during construction.
It will include modular bathroom pods that will be prefabricated off-site and then plugged into the building — processes that help save time and reduce construction waste.
Generate and Placetailor expect to begin construction in June 2020 and finish by early 2021. Placetailor’s director of strategy, Colin Booth, told Dezeen that the collaboration with Generate had shown the opportunity “to greatly simplify the building”.
“The CLT panels can be pre-routed to integrate mechanical, electrical and plumbing (MEP), which is already reduced due to the low energy demands of a Passivhaus; there is a reduction in harmful fireproofing materials, and there are ways to reduce things like paint, through the use of dyed plaster or drywall, by exposing the face of the CLT where possible,” Booth said.
Klein added that the inherent qualities of mass timber could help to sustainably revolutionise the construction industry.
“The upfront digital design effort required for construction with mass timber enables architects to think of buildings as digitally manufactured, kit-of-part assemblies, fabricated with extremely high tolerances,” he told Dezeen.
Generate is currently exploring the potential application of the Model-C system on projects up to 18 storeys, based on the new 2021 Tall Wood building codes. For now, mass-timber prototypes in the USA are limited to six storeys.
The project is the latest venture to test the limits of timber construction. Sidewalk Labs, the architecture and urbanism arm of Google parent company Alphabet, has unveiled a digital model for what would be the world’s tallest mass-timber building, reaching 35 storeys.
Renderings are by Forbes Massie Studio.
Project credits:
Placetailer team: Evan Smith and Colin Booth
Generate design team: John Klein, Zlatan Sehovic, Chris Weaver, John Fechtel, Jaehun Woo and Clarence Yi-Hsien Lee
Placetailer design team: Andres Bernal, Michelangelo LaTona, Travis Anderson, Elizabeth Hauver
Placetailer general contractor: Laura Jolly and Evan Smith
Burohappold team: Paul Richardson and Wolf Mangelsdorf
Ripcord engineering: Sonia Barrantes and Jacob Staub
Code Red: Brian Kuhn and Caitlin Gamache
The post Generate to build carbon-neutral CLT apartment block in Boston appeared first on Dezeen.